Digital Tutors - Modeling Plumbing Systems in Revit MEP

Duration 49m 10s Level Intermediate Project Files Included

Software used

Revit 2014

What you will learn

In this set of tutorials, we'll explore how to model a plumbing system using Revit MEP.

We'll begin by placing some plumbing fixtures through out a simple residential project. Once fixtures are in place, we'll then set two supply systems; the first a hot water supply and the second a cold water supply. From there we'll learn how to model drains, vents, and stacks tying the entire system together.After working through this tutorial, you'll gain a solid understanding of how to create a basic plumbing system and you should be able to overcome a lot of the obstacles that modeling a 3-D plumbing system may throw at you.

1. Introduction and project overview 00:48

2. Placing plumbing fixtures into a model 07:56

3. Setting up hot and cold water supply systems 09:01

4. Modeling ventilation stacks and drain pipes 10:32

5. Connecting pipes and ventilation stacks 07:40

6. Connecting and adjusting pipes and fittings 13:13